Powder Checks · Bullet Checks · Mark 7 reloading sensors

Powder directory

Alliant Reloder

Alliant Reloder 23

A temperature-stable standard and magnum rifle powder aimed at long-range target shooting across a wide range of conditions.

Official Alliant load data →

Specifications

ManufacturerAlliant
Product familyAlliant Reloder
StatusCurrently produced
Applicationrifle
Grain formextruded
Temperature stableYes — claimed by the manufacturer
Burn-rate position172 of 198 (fastest = 1) what this means
Typical cartridges.300 Winchester Magnum, 6.5 Creedmoor, .30-06 Springfield

One of Alliant's TZ technology powders, described as giving exceptionally consistent velocities across temperature extremes. Contains a proprietary de-coppering additive; Alliant states the formulation contains no DNT or DBP. Made in Sweden for Alliant.

Burn rate

Immediately slower than Reloder 22, with similar performance characteristics per Alliant.

Chart agreement: consistent across the three charts that list it Ranked by: Hodgdon, Alliant, Wolfe/LoadData.

Powders charted near it — neighbours on the chart are not substitutes, and adjacency tells you nothing about what charge either one takes:

Sources

Other Alliant powders

Back to the full directory →

Verify the charge, not just the recipe

Good data gets you a safe starting point. It does not tell you what actually went into the case on stroke 340 — a bridged measure, a double charge, a squib. That is what an RCM Laser Powder Check is for.