Alliant Reloder
Alliant Reloder 17
Aimed at short magnum loads, with medium rifle loads as a secondary use. Alliant highlights ballistic efficiency and high energy density.
Specifications
| Manufacturer | Alliant |
|---|---|
| Product family | Alliant Reloder |
| Status | Currently produced |
| Application | rifle |
| Grain form | extruded |
| Burn-rate position | 152 of 198 (fastest = 1) — what this means |
| Typical cartridges | 7mm WSM, .300 WSM, .30-06 Springfield |
Alliant says it meters easily and consistently and delivers maximum velocity even in extreme weather, but does not market it as one of the TZ temperature-stable formulations.
Burn rate
Slightly slower than Reloder 16; Alliant compares its burn speed to IMR IMR 4350.
Chart agreement: DISAGREEMENT — Alliant's own Reloader's Guide places Power Pro 4000-MR SLOWER than Reloder 16, 17 and 19; this list, following the Hodgdon spine, places it faster. Ranked here per the Hodgdon chart used as this list's spine. Ranked by: Hodgdon, Alliant, Shooters World, Wolfe/LoadData.
Powders charted near it — neighbours on the chart are not substitutes, and adjacency tells you nothing about what charge either one takes:
- IMR Enduron 4451 (position 149)
- Alliant Reloder 16 (position 150)
- Hodgdon H4350 (position 151)
- Accurate 4350 (position 153)
- Shooters World SW4350 (position 154)
- Norma 204 (position 155)
Sources
Other Alliant powders
Verify the charge, not just the recipe
Good data gets you a safe starting point. It does not tell you what actually went into the case on stroke 340 — a bridged measure, a double charge, a squib. That is what an RCM Laser Powder Check is for.
