Powder Checks
RCM Laser Powder Check Pro V4 — 7" Integrated Screen
V4 laser powder check with integrated 7-inch screen. Full dashboard at the press — live readings, pass/fail indicators, no phone required.
From $699.99View productMark 7 owners
Laser QC sensors for Mark 7 presses
Running an Evolution, APEX 10, or Revolution with an Autodrive? Every RCM sensor is built to drop into Mark 7 station layouts with no machining, connect directly to the Autodrive, and stop the press the moment a charge, bullet, or case is out of spec. We're an independent Wyoming shop — not owned by, sponsored by, or affiliated with any press manufacturer — and we run Mark 7 machines in our own loading room every week.
Why upgrade
What laser measurement adds to a Mark 7
The factory PowderCheck probe reports pass/fail through over/under windows. RCM laser powder checks measure the actual powder level in every case — no probe contact, no spills, no probe swaps between cartridges — and hold much tighter windows without false-alarm fatigue. Pro models log every round with timestamps and CSV export, so a clean session is something you can prove, not assume. Already running the factory probe? Our centering dies for the Mark 7 Powder Check fix the powder-spray and probe-strike problems without replacing the sensor.
Deciding between our models? Start with Pro vs. Standard and RCM laser vs. Mark 7 PowderCheck. Fighting false alarms on the factory sensor? Read the troubleshooting guide.
The lineup
Every RCM product fits your Mark 7
Powder Checks
RCM Laser Powder Check Pro V3
V3 laser powder check with off-press laser centering fixture and centering dies (9mm, .223/5.56). For Mark 7 and stand-alone presses.
From $549.99View product
Powder Checks
RCM Laser Powder Check Standard V3 — Mark 7 Automation
Digital laser powder check integrated with Mark 7 Autodrives — stops the press when beyond set point or range.
$499.99View product
Bullet Checks
RCM Bullet Check Pro
Detects bullet presence AND correct seating height. Prevents thousands of rounds from seating-die walk.
$549.99View product
Bullet Checks
RCM Bullet Check Standard
Integrates with Mark 7 Autodrive at station 9 or 10. Detects bullet presence to stop the press on missed bullets.
$219.99View productCase Presence
RCM Case Presence Pro
Eliminates mixed cases, fallen cases, and broken depriming pins. One-button setup with millimeter accuracy.
From $549.99View productDashboards
RCM Dashboard with 7" Screen
Sensor dashboard with 7-inch display. Supports up to 2 RCM sensors, CSV export, browser access over your network.
From $399.99View product
Bundles
Mark 7 Powder Check Centering Die Bundle — Buy 3, Get 1 Free
Pick 3 Mark 7 powder check centering dies — get the 4th free. 9mm and .223/5.56 included.
$149.99View product
Bundles
RCM Centering Die Bundle — Buy 3, Get 1 Free
Pick 3 centering dies — get the 4th free. 9mm and .223/5.56 included; specify 3rd and 4th calibers in order notes.
$99.99View product
Centering Dies
Mark 7 Powder Check Centering Die
Centering die with increased airflow around the probe — eliminates powder spills and probe strikes on case walls.
From $39.99View product
Centering Dies
RCM Centering Die
Centering die for V1/V2/V3 laser powder checks. Prevents vibration transfer to the laser head.
From $39.99View productNot sure what fits your station layout?
Tell us your press, Autodrive, and calibers — we'll spec the setup and tell you honestly what you do and don't need. Call 307-423-9296 or send a note.