Powder Checks · Bullet Checks · Mark 7 reloading sensors

Powder directory

Alliant Reloder

Alliant Reloder 10x

A small-bore rifle powder Alliant recommends for light-bullet loads in the .22 centerfires and for benchrest calibers, plus light-bullet .308 Winchester loads.

Official Alliant load data →

Specifications

ManufacturerAlliant
Product familyAlliant Reloder
StatusCurrently produced
Applicationrifle
Grain formextruded
Burn-rate position99 of 198 (fastest = 1) what this means
Typical cartridges.222 Remington, .223 Remington, .22-250 Remington, .308 Winchester

Positioned by Alliant as the best choice among its powders for light-bullet applications in small-capacity rifle cases.

Burn rate

Just slower than Reloder 7; a small-bore rifle speed.

Chart agreement: position varies - Alliant's own guide places Reloder 10X FASTER than Power Pro 1200-R; Hodgdon reverses the pair. Ordered here per Hodgdon. Ranked by: Hodgdon, Alliant, Vihtavuori, Shooters World.

Powders charted near it — neighbours on the chart are not substitutes, and adjacency tells you nothing about what charge either one takes:

Sources

Other Alliant powders

Back to the full directory →

Verify the charge, not just the recipe

Good data gets you a safe starting point. It does not tell you what actually went into the case on stroke 340 — a bridged measure, a double charge, a squib. That is what an RCM Laser Powder Check is for.