Powder Checks · Bullet Checks · Mark 7 reloading sensors

Powder directory

Accurate

Accurate LT-32

A benchrest competition powder developed for the 6mm PPC, with secondary use in varmint and tactical cartridges.

Official Accurate load data →

Specifications

ManufacturerAccurate
Product familyAccurate
StatusCurrently produced
Applicationrifle
Grain formextruded
Compositionsingle-base
Temperature stableNot marketed as temperature-stable
Burn-rate position88 of 198 (fastest = 1) what this means
Typical cartridges6mm PPC, 223 Remington, 308 Winchester

Manufacturer states the grain is small enough that it flows like a spherical powder despite being extruded, which is the practical reason it throws well. Marketed on low shot-to-shot standard deviation. Made in Canada.

Burn rate

Slightly slower than Accurate 2200, charted between Alliant Reloder 7 and IMR 4198.

Chart agreement: consistent, but single-publisher - ranked only by Hodgdon (and echoed by the Wolfe/LoadData compilation). No second manufacturer's chart carries it, so the position is uncorroborated. Ranked by: Hodgdon, Wolfe/LoadData.

Powders charted near it — neighbours on the chart are not substitutes, and adjacency tells you nothing about what charge either one takes:

Sources

Other Accurate powders

Back to the full directory →

Verify the charge, not just the recipe

Good data gets you a safe starting point. It does not tell you what actually went into the case on stroke 340 — a bridged measure, a double charge, a squib. That is what an RCM Laser Powder Check is for.